Disable Bgp Neighbor - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

disable bgp neighbor

disable bgp neighbor [<ip address> | all]
Description
Disables the BGP session.
Syntax Description
ip address
all
Default
N/A.
Usage Guidelines
After the session has been disabled, all the information in the route information base (RIB) for the
neighbor is flushed.
Example
The following command disables the BGP session:
disable bgp neighbor 192.1.1.17
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
1102
Specifies an IP address.
Specifies all neighbors.
ExtremeWare Software 7.0.0 Command Reference Guide