Config Debug-Trace Mpls-Signalling - Extreme Networks ExtremeWare Command Reference Manual

config debug-trace mpls-signalling

config debug-trace mpls-signalling <level>
Description
This command records debug information to the syslog.
Syntax Description
debug level
Default
The default level is 1.
Usage Guidelines
The
debug level
the messages recorded at lower levels.
Example
The following command sets the reporting level for MPLS signalling subsystem errors to 1:
config debug-trace mpls-signalling 1
Following is the log output at this level:
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<INFO:SYST> User admin logged out from telnet (100.100.105.1)
<INFO:USER> admin logged in through telnet (100.100.105.1)
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> last message repeated 3 times
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
<DBUG:IPHS> Skipping FDB refresh for 10.3.1.1 due to LSP
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a debug level:
0 — None.
1 — Records peer interface state msgs.
2 — No additional information recorded.
3 — Records finite state machine events
4 — No additional information recorded.
5 — Records MPLS signalling packets, such as hello packets and label mappings.
range is 1 to 5. Higher levels record more verbose messages. Higher levels also record
config debug-trace mpls-signalling
1519