Config Udp-Profile Add - Extreme Networks ExtremeWare Command Reference Manual

config udp-profile add

config udp-profile <profile_name> add <udp_port> [vlan <vlan name> | ip
address <dest_ipaddress>]
Description
Configures a UDP-forwarding profile.
Syntax Description
profile_name
udp_port
vlan name
dest_ipaddress
Default
N/A.
Usage Guidelines
A maximum of 10 UDP-forwarding profiles can be defined. Each named profile may contain a
maximum of eight "rules" defining the UDP port, and destination IP address or VLAN. A VLAN can
make use of a single UDP-forwarding profile. UDP packets directed toward a VLAN use an all-ones
broadcast on that VLAN.
Example
The following command adds port 34 to UDP profile port_34_to_server:
config udp-profile port_34_to_server add 34 ip address 10.1.1.1
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a UDP profile name.
Specifies a UDP port number.
Specifies a VLAN name.
Specifies an IP address.
config udp-profile add
817