Enable Ipxsap - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

IPX Commands

enable ipxsap

Enables IPX/SAP on the router.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is

enabled by default when the IPX VLAN is configured.

The following command enables IPX/SAP on the router:

enable ipxsap

This command was introduced in ExtremeWare 4.0.

Platform Availability

This command is available on the all "i" series systems.

ExtremeWare Software 7.0.0 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.0.0