config rip txmode
config rip txmode [none | v1only | v1comp | v2only] {vlan <vlan name>}
Description
Changes the RIP transmission mode for one or more VLANs.
Syntax Description
none
v1only
v1comp
v2only
vlan name
Default
v2only.
Usage Guidelines
If no VLAN is specified, the setting is applied to all VLANs.
Example
The following command configures the transmit mode for the VLAN finance to transmit version 2
format packets to the broadcast address:
config rip txmode v1comp finance
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies to not transmit any packets on this interface.
Specifies to transmit RIP version 1 format packets to the broadcast address.
Specifies to transmit RIP version 2 format packets to the broadcast address.
Specifies to transmit RIP version 2 format packets to the RIP multicast
address.
Specifies to apply settings to a specific VLAN name.
config rip txmode
957
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?