Config Sonet Clocking Ports - Extreme Networks ExtremeWare Command Reference Manual

config sonet clocking ports

config sonet clocking [line | internal] ports <portlist>
Description
Configures the clocking source for the specified SONET ports.
Syntax Description
line
internal
portlist
Default
The default setting is
Usage Guidelines
The clock is recovered from the received bitstream when
Example
The following command example selects line clocking for port 1 of the PoS module installed in slot 8 of
the BlackDiamond switch:
config sonet clocking line ports 8:1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
ExtremeWare Software 7.0.0 Command Reference Guide
Sets the line clocking on the specified port.
Sets internal clocking on the specified port.
Specifies the port number(s).
.
internal
clocking is configured.
line
config sonet clocking ports
1291