Enable Isis Originate-Default - Extreme Networks ExtremeWare Command Reference Manual

enable isis originate-default

enable isis [level-2 | area <isis area identifier>] originate-default
{always} cost <cost(0-4261412864)> type [internal | external]
Description
Enables the origination of a default route from a system into the level 1 area or level 2 subdomain.
Syntax Description
level-2
isis area identifier
always
cost
internal
external
Default
The default setting is disabled.
Usage Guidelines
When the
always
the kernel routing table. Otherwise the default route will be originated only if the default route is
available in the kernel route table.
Example
The following command enables the origination of an IS-IS default route that uses the internal metric
type and a cost of 15 for the level 2 subdomain:
enable isis level-2 originate-default cost 15 type internal
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the level 2 subdomain.
Specifies a level 1 area identifier
Specifes that the default route is always originated.
Specifies a cost from 0 to 4,261,412,864.
Specifies an internal metric type.
Specifies an external metric type.
option is specified, the default route is originated even if there is no default route in
enable isis originate-default
989