PoS Commands
Example
The following command configures the tagmapping attributes for input VLAN ID 30 and output VLAN
ID 130 for port 1 of the module installed in slot 8 for the input frames from the PPP link:
config dot1q tagmapping 30/130 port 8:1 ingress
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.
1266
ExtremeWare Software 7.0.0 Command Reference Guide