Extreme Networks ExtremeWare Command Reference Manual page 884

IP Unicast Commands
The keyword only applies to some of the options available on the show iproute command. The
mpls
s keyword is ignored when specified in conjunction with the following options:
mpl
• priority
• route-map
• summary
Example
The following command displays detailed information about all IP routing:
show iproute detail
Following is the output from this command:
Destination: 10.10.121.111/30
Gateway: 10.10.121.201
Metric : 1
Use : 14409
Destination: 10.11.166.112/29
Gateway: 10.17.0.1
Metric : 2
Use : 0
Destination: 10.13.105.112/29
Gateway: 10.11.110.123
Metric : 2
Use : 0
History
This command was available in ExtremeWare 2.0.
This command was modified in an ExtremeWare IP Technology Services Release based on
ExtremeWare v6.1.8b12 to support MPLS modules.
This command was modified to include a timestamp in ExtremeWare 6.2.2.
Platform Availability
This command is available on all platforms.
884
VLAN : helium
Flags : U------u-
M-Use : 0
VLAN : helium
Flags : UG-----um
M-Use : 0
VLAN : helium
Flags : UG-----um
M-Use : 0
Origin : *d
Time : 13:15:26:49
Acct-1 : 0
Origin : *be
Time : 01:11:23:49
Acct-1 : 0
Origin : *be
Time : 00:29:09:23
Acct-1 :
ExtremeWare Software 7.0.0 Command Reference Guide