Disable Rip Export - Extreme Networks ExtremeWare Command Reference Manual

disable rip export

disable rip export [direct | isis | isis-level-1 | isis-level-1-external |
isis-level-2 | isis-level-2-external | ospf | ospf-extern1 | ospf-extern2 |
ospf-inter | ospf-intra | static | vip]
Description
Disables RIP from redistributing routes from other routing protocols.
Syntax Description
static
direct
isis
isis-level-1
isis-level-1-external
isis-level-2
isis-level-2-external
ospf
ospf-intra
ospf-inter
ospf-extern1
ospf-extern2
vip
Default
Disabled.
Usage Guidelines
This command disables the exporting of static, direct, IS-IS, and OSPF-learned routes into the RIP
domain.
Example
The following command disables RIP from redistributing any routes learned from OSPF:
disable rip export ospf
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies static routes.
Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
Specifies IS-IS routes.
Specifies IS-IS level 1 routes.
Specifies IS-IS level 1 external routes.
Specifies IS-IS level 2 routes.
Specifies IS-IS level 2 external routes.
Specifies all OSPF routes.
Specifies OSPF-intra area routes.
Specifies OSPF-inter area routes.
Specifies OSPF external route type 1.
Specifies OSPF external route type 2.
Specifies VIP routes.
disable rip export
979