Extreme Networks ExtremeWare Command Reference Manual page 1278

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

PoS Commands

routed IP traffic (because IPCP imposes less header overhead, the maximum link throughput is higher

than with BCP).

The following command example configures BCP on the PPP port, and applies to a PoS module

installed in slot 1 of a BlackDiamond switch:

config ppp bcp off port 1:4

This command was first available in an ExtremeWare IP Technology Services Release based on

Platform Availability

This command is available on the BlackDiamond switch only. A similar command is available on the

Alpine switch.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0