BGP Commands
disable bgp always-compare-med
disable bgp always-compare-med
Description
Disables Multi Exit Discriminator (MED) from being used in the route selection algorithm.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
MED is only used when comparing paths from the same AS. Use this command to disable the MED
from being used when selecting a route.
Example
The following command disables MED from being used in the route selection algorithm:
disable bgp always-compare-med
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
1098
ExtremeWare Software 7.0.0 Command Reference Guide