Enable Mpls - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

MPLS Commands

enable mpls

Enables MPLS on the switch.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

Disabling MPLS causes all LSPs to be released and all LDP neighbor sessions to be terminated.

The following command globally enables MPLS on the switch:

This command was first available in an ExtremeWare IP Technology Services Release based on

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.0.0 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.0.0