Config Route-Map Delete Set - Extreme Networks ExtremeWare Command Reference Manual

config route-map delete set

config route-map <route-map> <seq_number> delete set [as-path <as_number> |
community [[access-profile <access-profile> | <as_number>:<number> | number
<community> | no-advertise | no-export | no-export-subconfed] | remove |
[add | delete] [access-profile <access-profile> | <as_number>:<number> |
number <community> | no-advertise | no-export | no-export-subconfed]] |
next-hop <ip address> | med <number> | local-preference <number> | weight
<number> | origin [igp | egp | incomplete] | tag <number> | accounting
index <number> value <number> | cost <number> | cost-type [ase-type-1 |
ase-type-2]]
Description
Deletes a route map
Syntax Description
route-map
seq-number
as-number
as_access_profile
as_number:number
community
no-export
no-advertise
no-export-subconfed
remove
add | delete <as_access_profile>
add | delete
<as_number:number>
add | delete <community>
add | delete <no-export>
add | delete <no-advertise>
add | delete
<no-export-subconfed>
next-hop <ipaddress>
internal
med_number
remove
add | delete <med_number>
local-preference <number>
weight <number>
ExtremeWare Software 7.0.0 Command Reference Guide
entry.
set
The name of the route map from which this statement should be deleted.
The sequence number of the entry in the route map from which this statement
should be deleted.
Specifies an AS number.
Specifies an AS path access profile.
Specifies a BGP community number, in as_number:number format.
Specifies a BGP community number, as an unsigned 32-bit integer in decimal
format.
Specifies the no-export attribute.
Specifies the no-advertise attribute.
Specifies the no-export-subconfed attribute.
Specifies removing the community attribute.
Specifies add or delete of the specified access profile.
Specifies add or delete of the specified BGP community number, in
as_number:number format.
Specifies add or delete of the specified BGP community number, specified as
an unsigned 32-bit integer in decimal format.
Specifies add or delete of the no-export attribute.
Specifies add or delete of the no-advertise attribute.
Specifies add or delete of the no-export-subconfed attribute.
Specifies the IP address of the next hop.
Specifies setting the MED attribute to a value equal to the metric to reach the
nexthop.
Specifies setting the MED attribute to a specified value.
Specifies removing the MED attribute.
Specifies add or delete of the specified value to or from the MED.
Specifies a local preference number.
Specifies a weight associated with the NLRI.
config route-map delete set
599