Config Debug-Trace Card-State-Change - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

Troubleshooting Commands

config debug-trace card-state-change

config debug-trace card-state-change <debug level>

This command is not currently supported.

Syntax Description

Specifies a debug level:

The default level is 0.

Usage Guidelines

This command is not currently supported.

This command is not currently supported.

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all "i" series platforms.

Not currently supported.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0