Extreme Networks ExtremeWare Command Reference Manual page 1404

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

MPLS Commands

messages are sent. The

value may be set to any value between zero to 100 (or

summary-refresh-time

10 seconds).

If configured, the bundled and summary refresh RSVP messages are only sent to RSVP-TE peers

supporting RSVP refresh reduction.

The following command configures the rsvp-te interface parameters for VLAN vlan1.

config mpls rsvp-te vlan vlan1 hello-interval 2 refresh-time 5

This command was first available in an ExtremeWare IP Technology Services Release based on

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0