Config Debug-Trace Igmp-Snooping - Extreme Networks ExtremeWare Command Reference Manual

config debug-trace igmp-snooping

config debug-trace igmp-snooping <debug level>
Description
This command records debug information to the system log.
Syntax Description
debug level
Default
The default level is 0.
Usage Guidelines
The
debug level
the messages recorded at lower levels.
Example
The following command sets the reporting level for igmp-snooping errors to 4:
config debug-trace igmp-snooping 4
Following is the log output at this level:
<INFO:SYST> msm-a-console admin: configure debug-trace igmp-snooping 5 vlan all
<DBUG:IGMP> IGMPS: igmpSnoopingDataInput L2 switch data (trunk6/224.0.0.13/15.1.6.3)
<DBUG:IGMP> IGMPS: addRouterEntry trunk6: port 1:1 raddr=15.1.6.3 rp=-2039713300
<DBUG:KERN> <--- End of chain (86499000) --->
<DBUG:KERN> 0x0886499046: 00 14 00 04 3c 59 6d f3 00 00 00 00 ****<Ym*****
<DBUG:KERN> 0x0886499036: 06 03 e0 00 00 0d 20 00 35 2f 00 01 00 02 00 69
*5/*****i
<DBUG:KERN> 0x0886499026: 08 00 45 c0 00 26 3d 70 00 00 01 67 86 30 0f 01
**E**&=p***g*0**
<DBUG:KERN> 0x0886499016: 01 00 5e 00 00 0d 00 01 30 0a 7e 00 81 00 e2 58
**^*****0*~****X
<DBUG:KERN> m0 @ 0x86499000:
<DBUG:KERN> <--- Start of chain (86499000) --->
<DBUG:IGMP> IGMPS: igmpSnoopingDataInput L2 switch data (trunk4/224.0.0.13/15.1.4.2)
<DBUG:IGMP> IGMPS: addRouterEntry trunk4: port 8:1 raddr=15.1.4.2 rp=-2039722596
<DBUG:KERN> <--- End of chain (86498700) --->
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies a debug level:
0 — None.
1 — Records warning messages, such as a memory shortage or invalid ptag.
2 — No additional information recorded.
3 — Records informational messages, such as deleting a sender, aging out an entry,
or disabling IGMP snooping.
4 — Displays a dump of each IGMP and data packet.
5 — No additional information recorded.
range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
Length=60 m_off=22 m_data=0x86499016
config debug-trace igmp-snooping
******
1497