Show Mpls Rsvp-Te - Extreme Networks ExtremeWare Command Reference Manual

MPLS Commands

show mpls rsvp-te

show mpls rsvp-te {<ipaddress>} {detail}
Description
Displays RSVP-TE LSP configuration information.
Syntax Description
ipaddress
detail
Default
N/A.
Usage Guidelines
This command displays information about the status of RSVP-TE enabled interfaces. Summary
information is displayed for all known RSVP-TE peers including the peer IP address and peer status. If
you specify the
ipaddress
displayed. Additional information is displayed in the detailed format if you specify the optional
keyword. The more detailed RSVP-TE information includes the number and type of RSVP messages
transmitted through the local RSVP-TE interface.
Example
The following displays detailed information about all configured RSVP-TE LSPs:
show mpls rsvp-te detail
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
1422
Specifies the IP address of the RSVP-TE interface.
Specifies to display the information in detailed format.
of the RSVP-TE interface, the information for a single RSVP-TE interface is
detail
ExtremeWare Software 7.0.0 Command Reference Guide