Show Diagnostics - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

show diagnostics

show diagnostics {slot [<slot number> | msm-a | msm-b]}
Description
Displays the status of the system health checker as well as information from the last diagnostic test run
on the switch.
Syntax Description
slot number
msm-a | msm- b
Default
N/A.
Usage Guidelines
Use this command to display the status of the system health checker as well as information from the
last diagnostic test run on the switch. The switch diagnostics are displayed in a tabular format with the
day, month, date, year, and time of the diagnostic test at the top of the table.
Table 28: Show Diagnostics Command Field Definitions
Field
System Platform
System Part No.
Main Board No.
MAC Address
Slot
CPU System
Registers Test
Memory Test
System Test
To run diagnostics on a I/O module or MSM64i, use the following command:
run diagnostics [extended | normal] slot [msm-a | msm-b | <slot number>]
Depending on the software version running on your switch or the model of your switch, additional or
different diagnostics information might be displayed.
Example
The following command displays the results of module diagnostics for the MSM64i in slot B:
show diagnostics slot msm-b
1568
Specifies the slot number of an I/O module.
Specifies the MSM64i.
Definitions
Specifies system type.
Specifies system part number, revision level, and serial number.
Specifies main board part number, revision level, and serial number.
Specifies system MAC address.
Specifies the slot for which the results are displayed.
Indicates diagnostic results.
Indicates diagnostic results.
Indicates diagnostic results.
Indicates diagnostic results.
ExtremeWare Software 7.0.0 Command Reference Guide