Unconfig Mpls - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

unconfig mpls

Resets MPLS configuration parameters to the default settings.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

This command resets the following configuration parameters:

• LDP propagation filter settings on all VLANs

• LDP advertisement filter settings

• LDP session timers

• RSVP-TE interface parameters

• RSVP-TE profile parameters

• Settings for propagate-ip-ttl

• QoS mapping tables

The following command resets MPLS configuration parameters to the default settings:

unconfig mpls

This command was first available in an ExtremeWare IP Technology Services Release based on

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the BlackDiamond switch only.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0