Config Isis Metric-Size - Extreme Networks ExtremeWare Command Reference Manual

config isis metric-size

config isis [level-2 | area <isis area identifier>] metric-size [regular |
wide | both]
Description
Configures the size of the metric originated in the LSP for the level 2 subdomain or level 1 area.
Syntax Description
isis area identifier
Default
The default setting is
Usage Guidelines
The
regular
specifications). The
specified in the traffic engineering draft). The
in both formats.
You can only use this command when IS-IS is disabled.
Example
The following command configures the metric size as
confit isis level-2 metric-size both
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies an area identifier.
.
regular
option indicates that the metric can have a maximum value of 63 (as specified in the basic
option indicates that the metric can have a maximum value of 4,261,412,864 (as
wide
option indicates that the metric should be described
both
for the level 2 subdomain:
both
config isis metric-size
909