config isis system-identifier
config isis system-identifier <system identifier>
Description
Configures a 6 hex octet system identifier for IS-IS routing.
Syntax Description
system identifier
Default
By default, the system identifier is set to the switch's MAC address. This command overrides that
default.
Usage Guidelines
The system identifier can only be configured when IS-IS processing is disabled.
Example
The following command sets the system identifier:
config isis system-identifier 0000.0000.001a
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the 6 hex octet system identifier. The format is xxxx.xxxx.xxxx where
x represents a hexidecimal digit.
config isis system-identifier
911