Extreme Networks ExtremeWare Command Reference Manual page 1461

config debug-trace bgp-msgs
Example
The following command sets the reporting level for BGP messages errors to 3:
config debug-trace bgp-msgs 3
Following is the log output at this level:
<DBUG:BGP> last message repeated 11 times
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> last message repeated 6 times
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> last message repeated 10 times
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> last message repeated 2 times
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<DBUG:BGP> Rx update from peer 10.10.0.1
<DBUG:BGP> Rcvd data from peer 10.10.0.1
<INFO:SYST> Log cleared
<INFO:SYST> serial admin: clear log
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide 1461