Extreme Networks ExtremeWare Command Reference Manual page 1527

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

config debug-trace ospf-neighbor

<DBUG:OSPF> NBR change, rtid 2.2.2.2 ipa 15.1.4.2 state = LOADING

<DBUG:OSPF> (73522)Sending Database pkt(0x81a5f8a0) len 52 to 15.1.4.2 if rif2

<DBUG:OSPF> sending ddpkt: 02020202 seq 000126ee flags SLAVE

<DBUG:OSPF> ProcDDP nbr 2.2.2.2 seq 000126ee flags MS

<DBUG:OSPF> (73522) Received Database packet from 15.1.4.2 to 15.1.4.1, len 52 proto

<DBUG:OSPF> (73522)Sending Database pkt(0x81a5f8a0) len 152 to 15.1.4.2 if rif2

<DBUG:OSPF> sending ddpkt: 02020202 seq 000126ed flags SLAVE

<DBUG:OSPF> NBR change, rtid 2.2.2.2 ipa 15.1.4.2 state = EXCHANGE

<DBUG:OSPF> is slave

<DBUG:OSPF> ProcDDP nbr 2.2.2.2 seq 000126ed flags I,M,MS

<DBUG:OSPF> (73522) Received Database packet from 15.1.4.2 to 15.1.4.1, len 32 proto

<DBUG:OSPF> (73522)Sending Database pkt(0x81a5f8a0) len 52 to 15.1.4.2 if rif2

<DBUG:OSPF> sending ddpkt: 02020202 seq 000007f1 flags I,M,MASTER

<DBUG:OSPF> NBR change, rtid 2.2.2.2 ipa 15.1.4.2 state = EX_START

<DBUG:OSPF> electDR: circ 83349bc0 dr = 15.1.4.1 bdr = 0.0.0.0

<DBUG:OSPF> NBR change, rtid 2.2.2.2 ipa 15.1.4.2 state = INIT

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all "i" series platforms.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0