Unconfig Switch - Extreme Networks ExtremeWare Command Reference Manual

unconfig switch

unconfig switch {all}
Description
Returns the switch configuration to its factory default settings.
Syntax Description
all
Default
Resets configuration to factory defaults without reboot.
Usage Guidelines
Use unconfig switch to reset the configuration to factory defaults, but without erasing the configuration
and rebooting. This preserves users account information, date and time settings, and so on.
Include the parameter
reboot using the last used image and configuration.
Example
The following command erases the entire current configuration, resets to factory defaults, and reboots
the switch using the last specified saved image and saved configuration:
unconfig switch all
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies that the entire current configuration should be erased, and the switch
rebooted.
to clear the entire current configuration, including all switch parameters, and
all
unconfig switch
1443