Cdev, Change Display Indication; Ciev, Indicator Event Reporting - Motorola G24 Guide Developer's Manual

+CDEV, Change Display Indication

When text on the display changes and the <disp> parameter of the +CMER command is set to 1,
the +CDEV indication is sent to the DTE.
Unsolicited Report
+CDEV: <x>,<y>,<text>,<highlighted>

+CIEV, Indicator Event Reporting

When a G24 indication is changed and the <ind> parameter of the +CMER command is set to 1,
the +CIEV indication is sent to the DTE.
Unsolicited Report
+CIEV: <ind>,<value>
The following table shows the +CIEV parameters.
<ind>
0
1
2
3
4
5
December 31, 2007
Table 3-211: +CDEV Parameters
<Parameter>
<x>
Indicates the x coordinate of the text.
<y>
Indicates the x coordinate of the text.
<text>
Is the new value of the text element.
< highlighted>
indicates whether the line has a backlight
0 - not highlighted
1 - highlighted
Table 3-212: +CIEV Parameters
Description <value> Range
Battery indicator 0-3
Signal bars 0-5
Service availability 0/1
Unread message 0/1
indication
Call in progress 0/1
Roaming indicator 0/1
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
Explanation
0 Low battery
3 Full battery
0 No signal
1 Low signal strength
5 High signal strength
0 Service available
1 Service not available
0 No unread messages
1 Unread messages exist
0 Call not in progress
1 Call in progress
0 Not roaming
1 Roaming
3-321