Firmware Update Over The Air (Fota); Fota Command For Non-Automatic Mode (Non-Transparent Mode) - Motorola G24 Guide Developer's Manual

Firmware Update Over the Air (FOTA)

Firmware Update Over the Air (FOTA)
FOTA Command for Non-Automatic Mode
(Non-Transparent Mode)
// First, set the Web-Session default entry
AT+MFOTAWSCFG=5,8080,"wap.orange.co.il","Orange","mobile54","192.118.11.55"
OK
AT+MFOTAWSCFG?
+MFOTAWSCFG: 5 , 8080,"wap.orange.co.il","Orange","192.118.11.55"
OK
// Second, set the DM session as Non-Automatic
// We would like to control all the FOTA steps, that the reason that we se the Non-Automatic mode.
AT+MFOTACNFG?
+MFOTACNFG: 0
// Enable FOTA indications
AT+MFOTAIND=1
+MFOTAREQ: 1
AT+MFOTARSP=0 OK
+MFOTAIND: 10, 5
+MFOTAIND: 10, 10
+MFOTAREQ: 2
AT+MFOTARSP=0
OK
+MFOTAIND: 10, 4
+MFOTAIND: 10, 5
+MFOTAIND: 10, 7
+MFOTAIND: 16, 14
+MFOTAIND: 16, 13, 0
+MFOTAIND: 16, 13, 5
+MFOTAIND: 15, 13, 5
+MFOTAIND: 15, 13, 44
+MFOTAIND: 15, 13, 83
+MFOTAIND: 15, 13, 100
4-34
// Read the Web-Session default entry parameters
// Request to begin DM session (Bootstrap)
// Confirm DM session
// Update package request
// Confirm the update process
// Open applications indication
// DM Session in progress
// DM Session complete
// Fetch descriptor file indication
// Descriptor progress bar indicate 0%
// Descriptor progress bar indicate 5%
// Update-package progress bar indicate 5%
// Update-package progress bar indicate 44%
// Update-package progress bar indicate 83%
// Update-package progress bar indicate 100%
AT Commands Reference Manual December 31, 2007