Secondary Receiver Audio Accessory; Failure Detected Indication And Handling; Troubleshooting - Motorola PMLN6714 User Manual

Secondary Receiver Audio Accessory

When a secondary accessory is plugged into the audio jack, audio will
be routed through secondary accessory

Attaching Secondary Receiver Audio Accessory
Lift up the dust cover and rotate 90
slot. Insert the secondary receiver audio accessory to 3.5 mm audio
jack.
2
Figure 2.13: Attaching secondary receiver audio accessory
o
. Plug the dust cover to the housing
1

Optional Accessories
Table 2.7: Optional Accessories
Part Number
Earpiece with Coiled Cord and 3.5 mm RT Angle
RLN4941_
RLN4885_ Receiver Earbud for Remote Speaker Microphone
NOTE:
Some part numbers may have regional prefix such as AA,
MD or AZ.

Failure Detected Indication and Handling

Any product error is indicated by alternating Red and Green blinks and
a failure detected indication (tone / voice prompt) will be heard. A few
seconds later the WRSM will recover.

Troubleshooting

If at any time the wireless connection cannot be re-established, or the
WRSM is operating incorrectly:
Procedure:
1
Power cycle the WRSM and the two-way radio.
2
Refer to "Pairing Your WRSM" on page 9" to repeat the connection
process.
Description
Plug
English
13