Mcwake, Gprs Coverage - Motorola G24 Guide Developer's Manual

Hardware Information

+MCWAKE, GPRS Coverage

This command tells the G24 whether to report on the status of the GPRS/GSM coverage. There
are three possibilities:
•
Do not report the status of the GPRS/GSM coverage.
•
Report only when the GPRS/GSM coverage goes off.
•
Report only when the GPRS/GSM coverage goes on.
Set
Read
Test
The following table shows the +MCWAKE parameters.
<Parameter>
<param>
Example
AT+MCWAKE=0
OK
AT+MCWAKE?
+MCWAKE: 0
OK
AT+MCWAKE=1
OK
AT+MCWAKE=2
OK
AT+MCWAKE=?
+MCWAKE: (0,1,2)
OK
3-202
Command Type
Table 3-131: +MCWAKE Parameters
0 Sends no indication.
1 Sends an indication when GPRS coverage goes off.
2 Sends an indication when GPRS coverage goes on.
The default value is 2.
AT Commands Reference Manual
Syntax
AT+MCWAKE=<param>
AT+MCWAKE?
AT+MCWAKE =?
Description
Response/Action
OK
+MCWAKE: <param>
OK
+MCWAKE: (list of supported
<param>s)
OK
December 31, 2007