Motorola G24 Guide Developer's Manual page 292

Hardware Information
Operation of this command is flex dependant.
Command Type
Set
Read
The following table shows the +TWUS parameters.
<bitmask>
00000000
00000001
00000002
00000004
00000008
00000010
00000020
Notes:
Example
AT+TWUS=3F
OK
AT+TWUS?
+TWUS: 3F
OK
AT+TWUS=3
OK
AT+TWUS?
+TWUS: 03
OK
//Power-cycle the phone
AT+TWUS?
+TWUS: 03
OK
3-208
Syntax
AT+TWUS=<bit
mask>
AT+TWUS?
Table 3-136: +TWUS Parameters
Disabled - No notifications provided for any events.
Loss of GSM Network.
Network Change.
Incoming Call.
Incoming Text SMS.
Incoming Binary SMS.
SMS storage full.
1. <bitmask> is a hexadecimal number in the range 0x00 to 0x3F. It is calculated as OR
of any or all of the events listed above.
2. Network Change event is change to different provider, not to a different cell of the same
provider.
3. Incoming SMS is considered Binary if it is encoded in 8bit data encoding. Otherwise
the incoming SMS is considered as Text.
AT Commands Reference Manual
Response/Action
OK Set wakeup reason.
or:
ERROR
+TWUS: <bitmask> Read current setting.
or:
ERROR
Description
Remarks
December 31, 2007