Motorola G24 Guide Developer's Manual page 395

commands like ATH/AT+CHLD and so on.
Note:
Command
Type
Set
The following table shows the +CKPD parameters.
<Parameter>
<keys>
<time>
<pause>
The following table shows the Character codes.
Character
#
*
0... 9
<
>
C/c
D/d
M/m
P/p
Q/q
S/s
December 31, 2007
The +CKPD command does not support DTMF tones.
Response/Action
+CKPD=<keys>[,<time>[,<pause>]]
Table 3-203: +CKPD Parameters
Virtual keycode (See
Time for which to hold the key (in 0.1 seconds)
0...255Seconds (default values are manufacturer specific, but should long enough that
a normal G24 can handle keystrokes correctly).
Time for which to pause between key presses (in 0.1 seconds)
0...255 Seconds (default values are manufacturer specific, but should be long enough
that a normal G24 can handle keystrokes correctly).
Table 3-204: Character Codes
IRA (dec)
35
42
48... 57
60
62
67/99
68/100
77/109
80/112
81/113
83/115
AT Commands Reference Manual
Chapter 3: AT Commands Reference
OK
or:
+CME ERROR: <err>
Description
Table 3-202).
Comment (and Known Key Sym-
Hash (Number sign)
Star (*)
Number keys
Left arrow
Right arrow
Clear display (C/CLR)
Volume down
Menu (MENU)
Power (PWR)
Quiet/Mute (MUTE)
Connection start (SEND)
Remarks
bols)
3-311