Motorola G24 Guide Developer's Manual page 271

Abbreviation/Term
Cell ID
CellResHys
Cell Resel. Offset
Channel type
Cipher mode
Coding Scheme
Deliver order
Downlink coding
scheme from
(Timeslot, coding
scheme)
Downlink timeslot
from (Timeslot,
coding scheme)
DTX
ECSC
Erroneous SDU
delivered
GPRS cell indicator
Granted delay class
Granted mean
throughput
Granted peak
throughput
Granted reliability
class
Granted precedence
class
Guaranteed bit rate dl
Guaranteed bit rate ul
HSN
IP address
LAC
MAIO
December 31, 2007
Table 3-122: EFEM Parameters (Cont.)
Cell Identity parameter, from System Info 3.
Cell reselect hysteresis, used to compute C2, in Bm (0 to 14 dBm). It is broadcast
on System Info 3.
Cell Reselect Offset, in dBm (between 0 and 63 dBm). It is broadcast on System
Info 3 rest octets.
Type of channel used in the current operating mode.
GSM encryption algorithm used. "5x" is displayed for the A5/x algorithm. "00"
means there is no encryption. Hashes ("##") indicate an unknown algorithm.
CS1 to CS4 for GPRS or modulation and coding scheme MC1 to MC9 for EDGE.
Indicates whether the GPRS bearer shall provide in-seq SDU delivery or not.
Coding scheme for the downlink data transmission (between 1 and 4). "*"
indicates an unknown coding scheme.
Timeslot used for downlink data transfer in the current TBF. Information for as
many as four timeslots can be displayed.
Indicates whether the use of discontinuous transmission has been reported to the
network at least once during the last period of EFEM parameter refresh.
Indicates whether the network accepts Early Classmark Sending (which it
indicates in System Info 3).
Indicates whether the GPRS bearer detected as erroneous shall be delivered or
discarded.
Indicates whether the serving cell offers GPRS services.
Delay class (between 1 and 6; 0 or 7 for reserved) granted by the network for the
current PDP context.
Mean throughput (in decimal, between 0 and 32) granted by the network for the
current PDP context.
Peak throughput (in decimal, between 0 and 15) granted by the network for the
current PDP context.
Reliability class (between 0 and 7) granted by the network for the current PDP
context.
Precedence class (between 0 and 7) granted by the network for the current PDP
context.
Guaranteed bit rate for Downlink in KPBS.
Guaranteed bit rate for Uplink in KPBS.
Hopping Sequence Number (between 0 and 63).
IP address for the PDP context.
Location Area Code.
Mobile Allocation Index Offset (between 0 and 63).
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Description
3-187