Motorola G24 Guide Developer's Manual page 344

Access
Command
Type
Set
Read
Test
The following table shows the +CLCK parameters.
<Parameter>
<fac>
<passwd>
<mode>
3-260
Syntax Response/Action
+CLCK=<fac>,<mode> For <fac> where
[,<passwd> <class> is irrelevant
[,<classx>]] (SC, FD):
+CLCK=<fac>,2
+CLCK: <status>
For <fac> with several
supported <class>es:
+CLCK=<fac>,2
+CLCK:
<status>,<class1>
[<CR><LF>+CLCK:
<status>,<class2>
[...]]
OK
+CLCK? +CLCK: ERROR
+CLCK=? +CLCK: (list of
supported <fac>s)
Table 3-173: +CLCK Parameters
SC SIM Card PIN setting
<mode>0 Disable PIN
1 Enable PIN)
FD SIM Fixed Dialing memory setting
<mode>0Disable fixed dialing feature
1Enable fixed dialing feature)
AO BAOC (Bar All Outgoing Calls)
OI BOIC (Bar Outgoing International Calls)
OX BOIC-exHC (Bar Outgoing International Calls except to Home Country)
AI BAIC (Bar All Incoming Calls)
IR BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
AB All Barring services (applicable only for <mode>=0)
AG All outgoing barring services (applicable only for <mode>=0)
AC All incoming barring services (applicable only for <mode>=0)
String type, 4-8 character password
0 Unlock
1 Lock
2 Query status (<passwd> does not apply)
AT Commands Reference Manual
Remarks
The Set command performs the
specified <mode> action on the
specified <fac>.
The Test command returns the list of
supported facilities.
Description
December 31, 2007