Core At Commands - Motorola G24 Guide Developer's Manual

At commands
Hide thumbs Also See for G24 Guide:
Table of Contents

Advertisement

Core AT Commands

The G24 responds to a limited commands set when the SIM card is not functioning, or not
present. These commands are referred to as the "Core AT commands".
In previous products, the Core AT commands were called "Basic AT commands". The name
"Core" differentiates between the basic AT commands format and the limited service AT
commands.
The following table lists the Core AT commands.
AT Command
$
%C
&C
&D
&F
&G
&J
&K
&L
&M
&P
&Q
&R
&S
&T
&V
&W
December 31, 2007
Table 2-1: Core AT Commands
Description
This command displays a list of all the AT commands supported by
the G24.
This command is supported for backward compatibility only, and
has no effect.
This command determines how the state of the DCD line relates to
the detection of the received line signal from the distant end.
This command determines how the G24 responds when the DTR
(Data Terminal Ready) status is changed from ON to OFF during
the online data state.
This command restores the factory default configuration profile.
This command is supported for backward compatibility only, and
has no effect.
This command is supported for backward compatibility only, and
has no effect.
This command configures the RTS/CTS flow control.
This command is supported for backward compatibility only, and
has no effect.
This command is supported for backward compatibility only, and
has no effect.
This command is supported for backward compatibility only, and
has no effect.
This command selects the asynchronous mode, and has no effect.
This command is supported for backward compatibility only, and
has no effect.
This command is supported for backward compatibility only, and
has no effect.
This command is supported for backward compatibility only, and
has no effect.
This command displays the current active configuration and stored
user profiles.
This command stores the user profile.
AT Commands Reference Manual
Chapter 2: Introduction to AT Commands
Page
Page 3-8
Page 3-422
Page 3-199
Page 3-201
Page 3-281
Page 3-422
Page 3-422
Page 3-198
Page 3-422
Page 3-422
Page 3-422
Page 3-35
Page 3-422
Page 3-422
Page 3-422
Page 3-307
Page 3-308
2-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents