Stk Mechanisms; Mtkr, Profile Download - Motorola G24 Guide Developer's Manual

GPRS/EDGE

STK Mechanisms

The mechanisms defined for the STK (
and protocols found in GSM 11.11.
Profile Download
Provide Local Information
Send DTMF
Set Up Idle Mode Text
Launch Browser
Set Up Event List

+MTKR, Profile Download

This command displays the profile that is downloaded from the G24 to the SIM during the SIM
initialization process. This profile includes the facilities relevant to the STK that are supported by
the G24, enabling the SIM to limit its instruction range to those STK features the G24 supports.
(Refer to "Profile Structure", page
not support the STK.
Profile download is performed automatically during device initialization, with no user
intervention required.
Command
Type
Read
3-358
Table 3-228: STK Mechanisms
Mechanism
3-359) Without a profile, the SIM assumes that the G24 does
Syntax
+MTKR?
AT Commands Reference Manual
) are dependent upon the relevant commands
Table 3-228
Description
Enables the G24 to tell the SIM what its capabilities are. (The
G24 is aware of the SIM's capabilities via the SIM Service Table
and EFPHASE.) Refer to "+MTKR, Profile Download",
page 3-358
Defined as part of the proactive SIM service, this command
requests the G24 to pass local information to the SIM, for
example, the mobile country and network codes (MCC + MNC)
of the network on which the user is registered.
Defined as part of the proactive SIM service, this command
requests the G24 to send DTMF tone(s) during an established
call. Refer to "Send DTMF", page
Defined as part of the proactive SIM G24, this command supplies
a text string to be used by the ME as stand-by mode text.
Defined as part of the proactive SIM service, this command
requests a browser inside a browser-enabled user terminal to
interpret the content corresponding to a URL.
Browser", page 3-375.
Defined as part of the proactive SIM service, this command
supplies a list of events, which the SIM wants the G24 to provide
details of when these events happen.
List", page 3-376.
Response/Action
+MTKR: <profile>
3-374.
Refer to "Launch
Refer to "Set Up Event
Remarks
The Read command
displays the current STK
profile.
December 31, 2007