Tsmsret, Control Sms Sending Retry; Mrics, Motorola Ring Indicator Configuration For Sms - Motorola G24 Guide Developer's Manual

SMS

+TSMSRET, Control SMS Sending Retry

This command controls the SMS sending retry.
If SMS sending retry is enabled, the ME will retry sending an SMS when the send operation
failed due to network or ME failure. If disabled, no retry will be done.
Operation of this command is flex dependant.
Command
Type
Set
Read
Test
The following table shows the +TSMSRET parameters.
<Parameter>
<n>
Example
AT+TSMSRET?
+TSMSRET: 1
OK
AT+TSMSRET=0
OK
AT+TSMSRET?
+TSMSRET: 0
OK
AT+TSMSRET=?
+TSMSRET: (0,1)
OK

+MRICS, Motorola Ring Indicator Configuration for SMS

This command allows configuring the behavior of RI line in a case of SMS arrival.
The command setting supports 3 SMS types:
•
SMS-DELIVER
•
SMS-STATUS-REPORT
•
CBM (broadcast message)
3-142
Syntax Response/Action
AT+TSMSRET=<n> OK
or:
ERROR
AT+TSMSRET? +TSMSRET:<n>
AT+TSMSRET=? +TSMSRET: (Supported
<n>s)
Table 3-86: +TSMSRET Parameters
0 SMS sending retry is disabled.
1 SMS sending retry is enabled (default setting).
AT Commands Reference Manual
Remarks
Description
December 31, 2007