Motorola G24 Guide Developer's Manual page 205

Bit/s
0-1
2
5
6
7
Reference
<sca>
<fo>
<mr>
December 31, 2007
Table 3-68: <fo> for SMS-DELIVER Message
Reference
Message-Type-Indicator
TP-More-Message-To-Send
TP-Status-Report-Indication
TP-User-Data-Header-Indicator
TP-Reply-Path
Table 3-69: Layout of SMS-STATUS-REPORT in PDU Mode (according to
Description
Mandatory:
Service Center address:
1 BYTE: length (number of
followed octets)
Mandatory:
1 BYTE: <tosca> - value between
128-255
Mandatory:
First Octet. See
Mandatory:
Message Reference number, which
identifying the previously submitted
SMS-SUBMIT or SMS-COMMAND
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Parameter describing the message type.
0 0 SMS-DELIVER (in the direction SC
to MS)
Parameter indicating whether or not more
messages are waiting to the MS in the
SC.
0 More messages are waiting for the MS
in this SC
1 No more messages are waiting for the
MS in this SC
Parameter indicating if a status report is
requested by the MS
0 A status report is not requested
1 A status report is requested
Parameter indicating whether or not a
status report will be returned to the SME.
0 A status report will not be returned to
the SME
1 A status report will be returned to the
SME
Parameter indicating that Reply Path is
set or not.
0 TP-Reply-Path parameter is not set
1 TP-Reply-Path parameter is set
GSM03.40)
1, 3-12 BYTES
(When length is 1, length BYTE = 0 )
1 BYTE
Table 3-70.
1 BYTE
Description
Length
3-121