Motorola G24 Guide Developer's Manual page 65

AT Command
+CDEV
+CIEV
GPRS
GPRS Commands
+CGCLASS
+CGDCONT
+CGQMIN
+CGQREQ
+CGACT
+CGPADDR
+CGATT
D*99
+CGPRS
+MDLC
+MIAU
EDGE Commands
+CGEQREQ
+CGEQMIN
+CGEQNEG
+MCEG
STK Commands
+MTKR
+MTKE
December 31, 2007
Table 1-1: AT Commands (Cont.)
Description
An unsolicited indication regarding display changes that is sent to
the DTE when the <disp> parameter of the +CMER command is set
to 1.
An unsolicited indication regarding various phone indications that is
sent to the DTE when the <ind> parameter of the +CMER command
is set to 1.
This command sets the GPRS mobile station class.
This command specifies the PDP (Packet Data Protocol) context.
This command sets the minimum acceptable quality of service
profile.
This command displays the requested quality of service profile.
This command activates/deactivates the PDP Context.
This command reads the allocated PDP addresses for the specified
context identifiers.
This command attaches the G24 to the GPRS network.
This command enables the ME to perform the actions necessary for
establishing communication between the terminal and the external
PDN.
This command indicates whether there is GPRS coverage.
This command establishes PPP link over serial port.
This command manages IP Director addresses and port.
This command allows the TE to specify a EDGE Quality of Service
Profile that is used when the MT sends an Activate PDP Context
Request message to the network.
This command allows the TE to specify a minimum acceptable
profile, which is checked by the MT against the negotiated profile
returned in the Activate/Modify PDP Context Accept message.
This command allows the TE to retrieve the negotiated QoS profiles
returned in the Activate PDP Context Accept message.
This command disables / enables EDGE support in G24 modules
with EDGE support capability.
This command displays the profile that is downloaded from the G24
to the SIM during the SIM initialization process.
This command enables/disables the SIM ToolKit functionalities.
AT Commands Reference Manual
Chapter 1: Product Features
Page
Page 3-321
Page 3-321
Page 3-324
Page 3-325
Page 3-327
Page 3-329
Page 3-330
Page 3-336
Page 3-330
Page 3-332
Page 3-334
Page 3-337
Page 3-338
Page 3-340
Page 3-346
Page 3-352
Page 3-356
Page 3-358
Page 3-367
1-31