Cscs, Select Terminal Character Set - Motorola G24 Guide Developer's Manual

Modem ID
The following table shows the +CGSN, +GSN parameters.
<Parameter>
<sn>
Example
AT+CGSN?
+CGSN: "004400013805666"
OK
AT+GSN
+GSN: "004400013805666"
OK

+CSCS, Select Terminal Character Set

This command selects the G24 character set. The G24 supports the following character sets:
GSM, UCS2, HEX, UTF8, 8859-1 and ASCII.
The default value, set upon system initialization or when omitting <chset> in set command, is
ASCII.
Note:
Command
Set
Read
Test
3-4
Table 3-1: +CGSN, +GSN Parameters
The IMEI (International Mobile Station Equipment Identity) number is comprised of
15 digits, as specified by GSM 03.03 [3]. IMEI numbers are composed of the
following elements, all in decimal digits:
Type Approval Code (TAC) - 6 digits
Serial Number (SNR) - 6 digits
Spare digit - 1 digit
The TAC and SNR are protected against unauthorized changes.
All commands except of +CUSD will treat "HEX" format just like UCS2.
Type
+CSCS=[<chset>]
AT+CSCS?
AT+CSCS=?
AT Commands Reference Manual
Description
Syntax Response/Action
OK
or:
+CMS ERROR: <err>
+CSCS: <selected character set>
+CSCS: (<supported character sets>)
December 31, 2007