Motorola G24 Guide Developer's Manual page 57

AT Command
+MVC
+MTTY
Call Status Messages
+CPAS
+CLCC
Call Advice of Charge Messages
+CAOC
+CACM
+CAMM
+CPUC
+CR
Supplementary Services
+CSSN
+CUSD
+COLP
Phone and Date Books
Directory Access Commands
+CPBS
+CPBR
+MCSN
+MDSI
December 31, 2007
Table 1-1: AT Commands (Cont.)
Description
This AT command is used to choose and configure the
priority order of the supported voice codecs (vocoders).
This command is used to enable/disable the TTY (Tele Typewriter)
support in the G24.
This command displays the current activity status of the G24, for
example, call in progress, or ringing.
This command displays a list of all current G24 calls and their
statuses, and also enables/disables the unsolicited indication of the
call list.
This command displays information about the cost of calls.
This command resets the Advice of Charge accumulated call meter
value in the SIM file, EFACM.
This command sets the Advice of Charge accumulated call meter
maximum value in the SIM file, EFACMmax.
This command sets the parameters of the Advice of Charge-related
price per unit and currency table found in the SIM file, EFPUCT.
This command controls whether or not the extended format of an
outgoing call is displayed or not.
This command handles the enabling and disabling of supplementary
service-related, network-initiated, notifications.
This command allows control of Unstructured Supplementary
Service Data (USSD), according to GSM 02.90.
This command refers to the GSM supplementary service COLP,
Connected Line Identification Presentation, which enables a calling
subscriber to get the connected line identity (COL) of the called
party after setting up a mobile-originated call.
This command handles the selection of the memory to be used for
reading and writing entries in G24s that contain more than one
phone book memory.
This command recalls phone book entries from a specific entry
number, or from a range of entries.
This command sets EFmsisdn in the SIM.
This command enables unsolicited reporting of indications of SIM
deactivation and invalidation.
AT Commands Reference Manual
Chapter 1: Product Features
Page
Page 3-43
Page 3-44
Page 3-46
Page 3-47
Page 3-55
Page 3-57
Page 3-58
Page 3-60
Page 3-61
Page 3-62
Page 3-65
Page 3-69
Page 3-71
Page 3-73
Page 3-81
Page 3-78
1-23