Motorola G24 Guide Developer's Manual page 462

GPRS/EDGE
The following table shows the Set Event List parameters.
<Parameter>
<Result>
<Data>
Note:
3-378
Table 3-255: Set Event List Parameters
5 User Activity event
6 Idle Screen Available event
8 Language Selection event
9 Browser Termination event
None User Activity event
None Idle Screen Available event
0 Browser Termination event (User terminated)
1 Browser Termination event (Error terminated)
4 Language Selection event, with string coded as follows:
Byte(s) Description
1 Language tag
2 Length='02'
3-4 Language
Each language code consists of a pair of alphanumeric characters, defined in ISO 639 [4].
Each character is coded on one byte using the SMS default 7-bit coded alphabet, as
defined in TS 23.038, with bit 8 set to 0. For a list of language codes, refer to the section
that follows.
AT Commands Reference Manual
Description
Length
1
1
2
December 31, 2007