Motorola G24 Guide Developer's Manual page 62

AT Commands Summary
AT Command
+MADIGITAL
Basic Audio Specific Commands
S94
S96
+CRSL
+CLVL
+CMUT
+MEDT
Advanced Audio Setup Commands
+MAPATH
+MAVOL
+MAFEAT
+MAMUT
Access
Access Control Commands
A/
AT
+CPIN
+EPIN
+TPIN
+CPWD
+CLCK
+EMPC
FOTA Commands
1-28
Table 1-1: AT Commands (Cont.)
Description
This command switches between analog and digital audio modes.
This S-parameter represents the Boolean status, On/Off, of the
sidetone feature.
This S-parameter represents the Boolean status, On/Off, of the echo
cancelling feature in the handsfree.
This command handles the selection of the incoming call ringer and
alert tone (SMS) sound level on the alert speaker of the G24.
This command sets the volume of the internal loudspeaker (which
also affects the key feedback tone) of the G24.
This command mutes/unmutes the currently active microphone path
by overriding the current mute state.
This command enables/disables the G24 tones.
This command sets/requests the active input accessory, and the
output accessory for each feature.
This command determines a volume setting for a particular feature
in a particular accessory.
This command controls the various algorithm features, such as
sidetone, echo cancel and noise suppress.
This command controls the muting/unmuting of all input paths
(MIC, HDST_MIC, DIGITAL_RX).
This command repeats the last command entered on the terminal.
This command checks the AT communication and only returns OK.
This command is only relevant for phones that use SIM cards. It
unlocks the SIM card when the proper SIM PIN is provided, and
unblocks the SIM card when the proper SIM PUK is provided.
This command is only relevant for phones that use SIM cards. It
verifies the PIN2 indicator.
This command queries the number of remaining SIM PIN/PUK
entering attempts.
This command sets a new password for the facility lock.
This command locks, unlocks or interrogates a G24 or a network
facility <fac>.
This command unlocks or resets the first PLMN of the
inserted SIM.
AT Commands Reference Manual
Page
Page 3-244
Page 3-235
Page 3-236
Page 3-232
Page 3-233
Page 3-234
Page 3-139
Page 3-237
Page 3-240
Page 3-243
Page 3-242
Page 3-252
Page 3-252
Page 3-253
Page 3-256
Page 3-257
Page 3-258
Page 3-259
Page 3-262
December 31, 2007