Motorola G24 Guide Developer's Manual page 453

The following table shows the+MTKP Field Descriptions.
Cmd Type
1
2
3
5
9
10
12
13
20
22
24
26
Note:
December 31, 2007
Table 3-250: +MTKP Field Descriptions
Description
Provides data about the "Display
text" pro-active command.
Provides data about the "Get Inkey"
pro-active command.
Provides data about the "Get Input'
pro-active command.
Provides data about 'Play Tone'
pro-active command.
Provides data about the 'Send SMS'
pro-active command.
Provides data about the 'Send SS'
pro-active command.
Provides data about the 'Setup call'
pro-active command.
Provides data about the 'Refresh'
pro-active command.
Provides data indicating the timeout
(get inkey, get input and select
item).
Provides a text string to display
when the G24 is in idle text mode.
Sends a DTMF string after a call
has been successfully established.
Displays a browser for URLs inside
browser-enabled G24s.
The Cmd Type numbers refer to the proactive command which was sent from the SIM
(This is the ProactiveCmdType field).
For "get inkey" and "get input", a one-minute timer is set, and any response for these
unsolicited commands after one minute is not accepted.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Responses
+MTKP: <ProactiveCmdType>,<Priority>,<Text>
+MTKP:
<ProactiveCmdType>,<ResponseType>,<HelpInfo
>[,<Text>]
+MTKP: <ProactiveCmdType>,<ResponseType>
,<SecurityMode>,<MinLen>,<MaxLen>,
<HelpInfo>[,<Text>]
+MTKP: <ProactiveCmdType>,
<ToneType>[,<TimeUnit>,<TimeInterval>],[<Text
>]
+MTKP: <ProactiveCmdType>[,<Text>]
+MTKP: <ProactiveCmdType>[,<Text>]
+MTKP: <ProactiveCmdType>,
<Type>,<CalledNb>,<Redials>,<Text>
+MTKP: <ProactiveCmdType>,<RefreshType>
+MTKP: <ProactiveCmdType>
+MTKP=22,"<idle mode text string>"
+MTKP: 24,<status>
+MTKP: <ProactiveCmdType>,
<URL>,<bearers>,<proxy_Id>[,<alpha_id>]
3-369