Email; Email Services At Commands; Memisp, Email Account Isp (Internet Service Provider) Settings - Motorola G24 Guide Developer's Manual

Email

Email Services AT Commands

+MEMISP, Email Account ISP (Internet Service Provider) Settings

This command defines the ISP (Internet Service Provider) setup parameters in order to establish
internet connection to apply email services on G24.
Note:
Command
Set
Read
Test
The following table shows the +MEMISP parameters.
<Parameter>
<apn_address>
<user_name>
<passw>
<dns_ip>
December 31, 2007
+MEMISP parameters are saved after the power cycle.
Syntax
Type
AT+MEMISP=<apn_ad
dress>[,<user_name>[,<
passw>[,<dns_ip>]]]
AT+MEMISP?
AT+MEMISP=?
Table 3-90: +MEMISP Parameters
String format. apn_address is a required setting Indicate Access Point Name address.
The valid characters are ASCII characters. Maximum length is 64 characters.
String format. Indicates the user name that will be used during connecting to the ISP.
The valid characters are ASCII characters. Maximum length is 48 characters.
String format. Indicates the password that will be used during connecting to ISP. The
password valid if it is either empty or conforms to RFC 1225. The valid characters are
ASCII characters. Maximum length is 40 characters.
Indicate the DNS IP address of the ISP. IP in format AAA.BBB.CCC.DDD (4 octant
separated by 3 dots), the range of each octant is 0-255, value can be written in 1 or 2
or 3 digits. The value: "0.0.0.0" is valid. Empty string is not permitted.
AT Commands Reference Manual
Chapter 3: AT Commands Reference
Response/Action
OK
Or:
+CME ERROR: <err>
+MEMISP:
<apn_address>,
<user_name>,<passw>,<d
ns_ip>
OK
+MEMISP: maximum
allowed length of
<apn_address>,
<user_name>,<passw>,
valid format of <dns_ip>
OK
Description
Remarks
3-149