Motorola G24 Guide Developer's Manual page 580

AT Commands Alphabetical Summary
+CCFC
+CCLK
+CCWA
+CDEV
+CEER
+CFSN
+CFUN
+CGACT
+CGATT
+CGCLASS
+CGDCONT
+CGEQMIN
+CGEQNEG
A-4
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command enables control of
the call-forwarding
supplementary service.
This command reads/sets the
G24's current date and time
settings.
This command controls the Call
Waiting supplementary service,
including settings and querying
of the network by the G24.
An unsolicited indication
regarding display changes that is
sent to the DTE when the <disp>
parameter of the +CMER
command is set to 1.
This command returns an
extended error report containing
one or more lines of information
text <report>, determined by the
manufacturer, providing reasons
for errors. The errors are call
clearing codes.
This command displays the
factory serial number.
This command shuts down the
phone functionality of smart
phones and PDAs with phone
capabilities.
This command
activates/deactivates the PDP
Context.
This command attaches the G24
to the GPRS network.
This command sets the GPRS
mobile station class.
This command specifies the PDP
(Packet Data Protocol) context.
This command allows the TE to
specify a minimum acceptable
profile, which is checked by the
MT against the negotiated profile
returned in the Activate/Modify
PDP Context Accept message.
This command allows the TE to
retrieve the negotiated QoS
profiles returned in the Activate
PDP Context Accept message.
AT Commands Reference Manual
Description
Page 3-29
Page 3-96
Page 3-23
Page 3-321
Page 3-296
Page 3-6
Page 3-204
Page 3-330
Page 3-330
Page 3-324
Page 3-325
Page 3-346
Page 3-352
Page
December 31, 2007