Motorola G24 Guide Developer's Manual page 589

+MCSN
+MCST
+MCWAKE
+MDBGD
+MDBR
+MDBW
+MDBWE
+MDC
+MDLC
+MDMIC
+MDSI
+MEDT
+MEGA
+MEMAS
December 31, 2007
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command sets EFmsisdn in
the SIM.
This command displays the
current state of the call
processing, and also
enables/disables the unsolicited
indication of any change in the
call processing state.
This command requests reports
on the status of the GPRS/GSM
coverage.
This command sets general
definitions for date book.
This command recalls date book
entries from a specific entry
number, or from a range of
entries.
This command stores a new entry
in the phone book, or updates an
existing entry from the date book.
This command deletes an
existing entry from date book and
adds or deletes exception
instance of an existing entry from
date book.
This command enables you to
select the desired messages to be
displayed upon connection of a
voice call with a remote party.
This command establishes PPP
link over serial port.
This command enables/disables
the setting of microphone gain
values by +MMICG in digital
audio mode.
This command enables
unsolicited reporting of
indications of SIM deactivation
and invalidation.
This command enables/disables
the G24 tones.
This command updates the Email
Gateway Address.
This command is used for Email
account settings.
AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-81
Page 3-49
Page 3-202
Page 3-88
Page 3-89
Page 3-91
Page 3-93
Page 3-38
Page 3-337
Page 3-246
Page 3-78
Page 3-139
Page 3-141
Page 3-150
Page
A-13