Motorola G24 Guide Developer's Manual page 583

+CMER
+CMGD
+CMGF
+CMGL
+CMGR
+CMGS
+CMGW
+CMSS
+CMUT
+CMUX
+CMT
+CMTI
+CNMA
+CNMI
+CNUM
December 31, 2007
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command enables an
external accessory to receive key
press information from the G24's
internal keypad.
This command deletes messages
from the G24 memory.
This command handles the
selection of message formats.
This command displays a list of
SMS messages stored in the G24
memory.
This command enables the user
to read selected SMS messages
from the G24 memory.
This command sends an SM from
the G24 to the network.
This command writes and saves
messages in the G24 memory.
This command selects and sends
pre-stored messages from the
message storage.
This command mutes/unmutes
the currently active microphone
path by overriding the current
mute state.
This command is used to
enable/disable the GSM MUX
multiplexing protocol stack.
This unsolicited message
forwards the SMS upon its
arrival.
This unsolicited message,
including the SMS index, is sent
upon the arrival of an SMS.
This command acknowledges the
receipt of a +CMT response.
This command sends an
unsolicited indication when a
new SMS message is received by
the G24.
This command returns up to five
strings of text information that
identify the G24.
AT Commands Reference Manual
Appendix A: Reference Tables
Description
Page 3-314
Page 3-132
Page 3-101
Page 3-114
Page 3-118
Page 3-134
Page 3-127
Page 3-125
Page 3-234
Page 3-438
Page 3-108
Page 3-110
Page 3-108
Page 3-107
Page 3-7
Page
A-7