Motorola G24 Guide Developer's Manual page 594

AT Commands Alphabetical Summary
+MPINGSTAT
+MPSU
+MRICS
+MRST
+MSCTS
+MSDNS
+MTCTS
+MTDTR
+MTKC
+MTKE
+MTKM
+MTKP
+MTKR
A-18
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This is the unsolicited response
that the G24 sends to the terminal
to inform of ping execution status
update and provides summary
statistics of ping request when
ping request execution is
completed.
This command defines the
functionality of the second
physical UART.
This command allows
configuring the behavior of RI
line in a case of SMS arrival.
This command enables customer
software to perform a hard reset
to the G24 unit.
This command defines the
behavior of the CTS line when
the G24 is in Sleep mode.
This command set/read DNS IP
address for each socket.
This command sets the CTS pin
of the RS232 to not active (high),
waits one second and then returns
the CTS to active (low).
This command checks and
outputs the physical current
status of the DTR pin of the
RS232.
This unsolicited event notifies the
terminal when supplementary
services, SMS Control or Call
Control are modified.
This command enables/disables
the SIM ToolKit functionalities.
This is both a command and an
unsolicited event. The command
selects items from the menu.
This is both a command and an
unsolicited event. The command
responds to an unsolicited event.
This command displays the
profile that is downloaded from
the G24 to the SIM during the
SIM initialization process.
AT Commands Reference Manual
Description
Page 3-409
Page 3-211
Page 3-142
Page 3-207
Page 3-288
Page 3-412
Page 3-198
Page 3-197
Page 3-385
Page 3-367
Page 3-383
Page 3-368
Page 3-358
Page
December 31, 2007