Motorola G24 Guide Developer's Manual page 582

AT Commands Alphabetical Summary
+CIMI
+CIND
+CKEV
+CKPD
+CLAC
+CLAN
+CLCC
+CLCK
+CLIP
+CLIR
+CLVL
+CMEE
A-6
Table A-1: AT Commands (Alphabetical) (Cont.)
AT Command
This command requests the
International Mobile Subscriber
Identity number.
This command is used to query
the status of various ME
indicators.
This command causes the G24 to
send an unsolicited message
when a key is pressed on the G24
keypad, and local key press echo
is enabled.
This command emulates key
presses, or virtual keycodes, as if
entered from the G24 keypad or
from a remote handset.
This command displays a list of
all the AT commands supported
by the G24.
This command handles the
selection of language in the ME.
This command returns a list of all
current G24 calls and their
statuses, and also
enables/disables the unsolicited
indication of the call list.
This command locks, unlocks or
interrogates a G24 or a network
facility <fac>.
This command controls the
Calling Line Identity (CLI)
presentation to the terminal when
there is an incoming call.
This command enables/disables
the sending of caller ID
information to the called party,
for an outgoing call.
This command sets the volume of
the internal loudspeaker (which
also affects the key feedback
tone) of the G24.
This command enables/disables
the use of result code +CME
ERROR: <err> as an indication
of an error relating to the
functionality of the G24.
AT Commands Reference Manual
Description
Page 3-6
Page 3-316
Page 3-320
Page 3-310
Page 3-9
Page 3-315
Page 3-47
Page 3-259
Page 3-21
Page 3-31
Page 3-233
Page 3-289
Page
December 31, 2007