Motorola G24 Guide Developer's Manual page 174

Phone and Date Books and Clock
This command is a non-basic command, which means that the G24 module rejects the command
with an appropriate error message when the SIM is not present and/or the phone is in lock state.
Command Type
Set
Test
The following table shows the +MDBR parameters.
Index
Title
Time
Date
Duration
Repeat
3-90
Syntax Response/Action
+MDBR=<Index1 +MDBR:<Index>,"<Ti
>[,<Index2>] me>",
"<Date>","<Title>",
<Duration>,<Repeat>,
"<Exceptions>"
OK
or:
+CME ERROR:
<error_code>
+MDBR=? +MDBR: <Entries>,
<Used>, <tLength>,
<mException>,
<actions>
OK
or:
+CME ERROR:
<error_code>
Table 3-47: +MDBR Parameters
<Parameter>
AT Commands Reference Manual
The Set command returns date book
entries.
Returns information about date book.
Description
Index for a given date book entry.
Title identifier for a date book entry, according to the
character set as specified by command +CSCS.
Time format: HH:MM, according to the character set as
specified by command +CCLK.
Date format: YY/MM/DD, according to the character
set as specified by command +CCLK.
A time length of the reminder in minutes values.
Number in 0-997920 range.
A schedule multiple recurring instances.
0 - None.
1 - Daily.
2 - Weekly.
3 - Monthly on day (for example: 2nd Wednesday each
month).
4 - Monthly on date (for example: every 15th of the
month). If on days that do not occur each mount such as
the 29th, 30th, or 31st, the reminder is activated on the
last week day of the month.
5 - Yearly.
Remarks
December 31, 2007